Screens
SEPARPLAST
- Fiber Recovery from Coarse Screen Rejects
- Primary Screen Application
- 120 t/d
- Tailing
Screen Application
- 50 t/d
- Vertical design reduces maintenance
- Payback less than 6 months in most cases
KEY SCREEN
The key screen has been
designed to work with a stock consistency inlet between 3% and 5%
maintaining a reject rate between 7% and 15%.
No considerable
thickening effects have been detected, so the dilution water is not
needed.
ST
Macchine has developed four sizes
of the K-Screen to offer a range of machines able to satisfy the needs of
the paper mills, especially for a
three stage configuration screening. Baskets with holes from 1.2 to
2.5 mm or slots from 0.10 to 0.40 mm can be used in the K-Screen.
| Size | Flow Rate (gpm) | Power (Hp) |
| GR-I | 300 | 30 |
| GR-II | 500 | 75 |
| GR-III | 1,000 | 125 |
| GR-IV | 1,750 | 200 |
|
|
K-Screen
Separplast
Worldwide Service
info@Lamcor.com